Masato Inoue

  • Source: Scopus
  • Calculated based on no. of publications stored in Pure and citations from Scopus
20032021

Research activity per year

If you made any changes in Pure these will be visible here soon.
Filter
Conference contribution

Search results

  • 2018

    A strategy of providing upgradable product service system for economic and environmental balance

    Yamada, S., Sugiura, T., Yamada, T., Bracke, S. & Inoue, M., 2018, Transdisciplinary Engineering Methods for Social Innovation of Industry 4.0: Proceedings of the 25th ISPE Inc. International Conference on Transdisciplinary Engineering. Wognum, N., Stjepandic, J., Pellicciari, M., Bil, C. & Peruzzini, M. (eds.). IOS Press BV, p. 1155-1164 10 p. (Advances in Transdisciplinary Engineering; vol. 7).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionpeer-review

    4 Citations (Scopus)
  • Comparison between Different Products by Disassembly System Design with Parts Selection for Cost, Recycling and CO2 Saving Rates Using Multi-objective Optimization

    Igarashi, K., Yamada, T., Itsubo, N. & Inoue, M., 2 Jul 2018, Proceedings - 2018 7th International Congress on Advanced Applied Informatics, IIAI-AAI 2018. Institute of Electrical and Electronics Engineers Inc., p. 694-699 6 p. 8693339. (Proceedings - 2018 7th International Congress on Advanced Applied Informatics, IIAI-AAI 2018).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionpeer-review

  • Mathematical Modeling of Multi-player Multi-objective Decision Making by Linear Physical Programming

    Yatsuka, T., Ishigaki, A., Ijuin, H., Kinoshita, Y., Yamada, T. & Inoue, M., 2 Jul 2018, Proceedings - 2018 7th International Congress on Advanced Applied Informatics, IIAI-AAI 2018. Institute of Electrical and Electronics Engineers Inc., p. 706-711 6 p. 8693357. (Proceedings - 2018 7th International Congress on Advanced Applied Informatics, IIAI-AAI 2018).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionpeer-review

    2 Citations (Scopus)
  • Proposal of an appropriate repair option from the view point of product value, environment impact and cost: Case study of automobile engine

    Okamoto, T., Fujita, M., Mori, T., Tamaki, M., Hayakawa, A. & Inoue, M., 2018, Transdisciplinary Engineering Methods for Social Innovation of Industry 4.0: Proceedings of the 25th ISPE Inc. International Conference on Transdisciplinary Engineering. Wognum, N., Stjepandic, J., Pellicciari, M., Bil, C. & Peruzzini, M. (eds.). IOS Press BV, p. 927-935 9 p. (Advances in Transdisciplinary Engineering; vol. 7).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionpeer-review

  • Reliability and safety engineering: The principles innovation and optimisation of german and japanese product constructions

    Bracke, S. & Inoue, M., 1 Jan 2018, Safety and Reliability - Safe Societies in a Changing World - Proceedings of the 28th International European Safety and Reliability Conference, ESREL 2018. van Gulijk, C., Haugen, S., Barros, A., Vinnem, J. E. & Kongsvik, T. (eds.). CRC Press/Balkema, p. 221-226 6 p. (Safety and Reliability - Safe Societies in a Changing World - Proceedings of the 28th International European Safety and Reliability Conference, ESREL 2018).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionpeer-review

    1 Citation (Scopus)
  • Reliability engineering based on operating data and monitoring systems within technical products: Challenges, requirements and approaches

    Bracke, S., Hinz, M., van Gulijk, C., Gronwald, F., Muenker, M., Inoue, M., Yamada, S., Patelli, E., Ulutas, B., Bonato, M. & Yamada, T., 1 Jan 2018, Safety and Reliability - Safe Societies in a Changing World - Proceedings of the 28th International European Safety and Reliability Conference, ESREL 2018. van Gulijk, C., Haugen, S., Barros, A., Vinnem, J. E. & Kongsvik, T. (eds.). CRC Press/Balkema, p. 1069-1076 8 p. (Safety and Reliability - Safe Societies in a Changing World - Proceedings of the 28th International European Safety and Reliability Conference, ESREL 2018).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionpeer-review

  • 2017

    Challenges, trends and approaches of future reliability engineering in high precision manufacturing processes

    Bracke, S., Backes, B., Patelli, E., Inoue, M., Yamada, S., Ulutas, B., Hartl, C., Dültgen, P., Młyńczak, M. & Suel, G., 1 Jan 2017, 24th International Conference on Production Research, ICPR 2017. Fertsch, M., Stachowiak, A., Mrugalska, B., Oleskow-Szlapka, J., Hadas, L., Cyplik, P. & Golinska-Dawson, P. (eds.). DEStech Publications, p. 19-24 6 p. (24th International Conference on Production Research, ICPR 2017).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionpeer-review

  • Disassembly parts selection for recovery rate and cost considering reuse

    Hasegawa, S., Kinoshita, Y., Yamada, T., Inoue, M. & Bracke, S., 1 Jan 2017, 24th International Conference on Production Research, ICPR 2017. Fertsch, M., Stachowiak, A., Mrugalska, B., Oleskow-Szlapka, J., Hadas, L., Cyplik, P. & Golinska-Dawson, P. (eds.). DEStech Publications, p. 486-491 6 p. (24th International Conference on Production Research, ICPR 2017).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionpeer-review

    1 Citation (Scopus)
  • Effect of Material Prices for Global Supply Chain Network with Trans-Pacific Partnership

    Nakamura, K., Ijuin, H., Yamada, T., Ishigaki, A. & Inoue, M., 15 Nov 2017, Proceedings - 2017 6th IIAI International Congress on Advanced Applied Informatics, IIAI-AAI 2017. Hashimoto, K., Fukuta, N., Matsuo, T., Hirokawa, S., Mori, M. & Mori, M. (eds.). Institute of Electrical and Electronics Engineers Inc., p. 953-958 6 p. 8113381. (Proceedings - 2017 6th IIAI International Congress on Advanced Applied Informatics, IIAI-AAI 2017).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionpeer-review

  • Linear Physical Programming Oriented Approach of Reverse Supply Chain Network Design for Costs and Recycling Rate

    Ijuin, H., Kinoshita, Y., Yamada, T., Ishigaki, A. & Inoue, M., 15 Nov 2017, Proceedings - 2017 6th IIAI International Congress on Advanced Applied Informatics, IIAI-AAI 2017. Hashimoto, K., Fukuta, N., Matsuo, T., Hirokawa, S., Mori, M. & Mori, M. (eds.). Institute of Electrical and Electronics Engineers Inc., p. 959-964 6 p. 8113382. (Proceedings - 2017 6th IIAI International Congress on Advanced Applied Informatics, IIAI-AAI 2017).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionpeer-review

    2 Citations (Scopus)
  • Reliability engineering in face of shorten product life cycles: Challenges, technique trends and method approaches to ensure product reliability

    Bracke, S., Hinz, M., Inoue, M., Patelli, E., Kutz, S., Gottschalk, H., Ulutas, B., Hartl, C., Mörs, P. & Bonnaud, P., 1 Jan 2017, Risk, Reliability and Safety: Innovating Theory and Practice - Proceedings of the 26th European Safety and Reliability Conference, ESREL 2016. Walls, L., Revie, M. & Bedford, T. (eds.). CRC Press/Balkema, 1 p. (Risk, Reliability and Safety: Innovating Theory and Practice - Proceedings of the 26th European Safety and Reliability Conference, ESREL 2016).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionpeer-review

    2 Citations (Scopus)
  • 2016

    A universal design method for reflecting physical characteristics variability: Case study of a bicycle frame

    Shimada, M., Suzuki, W., Yamada, S. & Inoue, M., 1 Jan 2016, Universal Design 2016: Learning from the Past, Designing for the Future - Proceedings of the 3rd International Conference on Universal Design, UD 2016. Swallow, D., Sandoval, L., Lewis, A., Darzentas, J., Petrie, H., Walsh, T. & Power, C. (eds.). IOS Press, p. 405-406 2 p. (Studies in Health Technology and Informatics; vol. 229).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionpeer-review

  • 2014

    Set-based design method reflecting the different designers' intentions

    Inoue, M. & Ishikawa, H., 1 Jan 2014, Competitive Design - Proceedings of the 19th CIRP Design Conference. Roy, R. & Shehab, E. (eds.). Cranfield University Press, p. 404-411 8 p. (Competitive Design - Proceedings of the 19th CIRP Design Conference).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionpeer-review

    2 Citations (Scopus)
  • 2013

    A design method for unexpected circumstances: Application to an active isolation system

    Inoue, M., Takahashi, M. & Ishikawa, H., 1 Dec 2013, 20th ISPE International Conference on Concurrent Engineering, CE 2013 - Proceedings. p. 155-162 8 p. (20th ISPE International Conference on Concurrent Engineering, CE 2013 - Proceedings).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionpeer-review

  • Approaches for sustainability assessment in the conceptual design phase

    Lindow, K., Woll, R., Inoue, M., Ishikawa, H. & Stark, R., 1 Jan 2013, CIRP Design 2012 - Sustainable Product Development. Springer-Verlag London Ltd, p. 377-387 11 p. (CIRP Design 2012 - Sustainable Product Development).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionpeer-review

    1 Citation (Scopus)
  • Decision-making support for selection of design ideas at the early phase of structural design

    Inoue, M., Nahm, Y. E., Tanaka, K. & Ishikawa, H., 2013, Concurrent Engineering Approaches for Sustainable Product Development in a Multi-Disciplinary Environment - Proceedings of the 19th ISPE International Conference on Concurrent Engineering. Springer-Verlag London Ltd, p. 521-532 12 p. (Advanced Concurrent Engineering).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionpeer-review

    1 Citation (Scopus)
  • 2011

    Design support for "Suriawase": Japanese way for negotiation among several teams

    Inoue, M., Mogi, R., Nahm, Y. E. & Ishikawa, H., 1 Dec 2011, Improving Complex Systems Today - Proceedings of the 18th ISPE International Conference on Concurrent Engineering. p. 385-392 8 p. (Advanced Concurrent Engineering).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionpeer-review

    6 Citations (Scopus)
  • 2010

    Application of sustainable aspects to the set-based design method

    Inoue, M., Lindow, K., Stark, R. & Ishikawa, H., 1 Dec 2010, 11th International Design Conference, DESIGN 2010. p. 811-820 10 p. (11th International Design Conference, DESIGN 2010).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionpeer-review

    2 Citations (Scopus)
  • Preference set-based design method for sustainable product creation

    Inoue, M., Lindow, K., Stark, R. & Ishikawa, H., 1 Dec 2010, New World Situation: New Directions in Concurrent Engineering - Proceedings of the 17th ISPE International Conference on Concurrent Engineering. p. 387-394 8 p. (Advanced Concurrent Engineering).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionpeer-review

    3 Citations (Scopus)
  • Set-based design method for the early phase design of structures with uncertainties

    Inoue, M., Hattori, Y. & Ishikawa, H., 2010, ASME 2010 International Mechanical Engineering Congress and Exposition, IMECE 2010. PARTS A AND B ed. p. 833-841 9 p. (ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE); vol. 3, no. PARTS A AND B).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionpeer-review

  • Set-based fem for product design with uncertainties

    Ishikawa, H. & Inoue, M., 1 Jan 2010, Proceedings of the ASME International Mechanical Engineering Congress and Exposition 2009, IMECE 2009. American Society of Mechanical Engineers (ASME), p. 255-257 3 p. (ASME International Mechanical Engineering Congress and Exposition, Proceedings; vol. 4).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionpeer-review

    1 Citation (Scopus)
  • 2009

    The set-based multi-objective satisfactory design for the initial design with uncertainties in collaborative engineering

    Inoue, M., Nahm, Y. E. & Ishikawa, H., 2009, Global Perspective for Competitive Enterprise, Economy and Ecology - Proceedings of the 16th ISPE International Conference on Concurrent Engineering. Springer-Verlag London Ltd, p. 381-388 8 p. (Global Perspective for Competitive Enterprise, Economy and Ecology - Proceedings of the 16th ISPE International Conference on Concurrent Engineering).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionpeer-review

  • 2008

    Evaluation of environmental loads based on 3D-CAD

    Inoue, M., Takashima, Y. & Ishikawa, H., 1 Jan 2008, Collaborative Product and Service Life Cycle Management for a Sustainable World - Proceedings of the 15th ISPE International Conference on Concurrent Engineering, CE 2008. Springer-Verlag London Ltd, p. 585-592 8 p. (Collaborative Product and Service Life Cycle Management for a Sustainable World - Proceedings of the 15th ISPE International Conference on Concurrent Engineering, CE 2008).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionpeer-review

    2 Citations (Scopus)